Pompa perystaltyczna BQ80S 0,005-20ml/min

BQ80S Micrometeror Speed –Variable Peristaltic Pump can work on the desktop without any fixed plate, meanwhile, embedded design makes the pump can assort with other equipments conveniently .Its flow range is 0.005-32ml/min,Speed range is 0.1-80rpm.Having basic functions such as reversible direction, start/stop, full speed (fast cleaning, empty) and speed- variable. Dispensing function realizes the repeat timing quantitative dispensing. The pump head loads Pharmed BPT tubing whose working life is up to 12000 hours under continuously running. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC.

Opis

Function and Feature
• Simple operation, small size, easy installation, suitable for ancillary equipment and laboratories.
• Built-in Pharmed BPT tubing whose working life is up to 12000 hours under continuously running
• Four-figure digital LED indicator displays working speed.
• The LED indicator displays the internal, external control mode.
• Mask keypad operation.
• Reversible direction, start/stop, adjust speed and full speed, state memory (power-down memory).
• Easy dispensing function, it realizes the repeat timing quantitative dispensing.
• Speed resolution is 0.1rpm.
• Plastic housing, adopts embedded design, also can work on the desktop separately.
• The circuit board with conformal coating makes it dust-proof and moisture-proof.
• Super anti-interference feature, wide input voltage range, acceptable for the complex power environment.
• External high-low electrical level controls the start/stop, reversible direction and easy dispensing function,
optically coupled isolator.
• Can input the electrical level 5V,12V or 24V.
• RS485 interface, MODBUS protocol is available, easy to connect other equipments.
•Optional footswitch or timer for dispensing fluid. 

Functions and Features

  • Simple operation, portable size, easy to install. Suitable for equipment as an ancillary device and for laboratory use.
  • 0.5% high precision rotating speed control with 0.1 rpm speed resolution. Speed range 0.1-80 rpm.
  • The lifetime of the built-in Pharmed BPT tubing is up to 12000 hours for continuous running.
  • Four-digit LED displays working speed and control mode.
  • Membrane keypad.
  • Reversible direction, start/stop, adjustable speed.
  • Time dispense function. Repeat dispensing by setting the dispense duration time.
  • Plastic housing, embedded design to work independently.
  • The circuit board with conformal coating makes it dust-proof and moisture-proof.
  • External logic level signal can control start/stop, direction and dispense function. External analog signal can adjust the rotating speed. Signal is optically isolated.
  • MODBUS RS485 interface, easy to communicate with external control devices.
  • Optional footswitch or timer for dispensing fluid.

Specifications

  • Flow range: 0.005-64 mL/min
  • Speed range: 0.1-80 rpm
  • Speed accuracy: 0.5%
  • Speed resolution: 0.1 rpm
  • Power supply: AC 220V ± 10%, 50Hz/60Hz, AC 110V ± 10%, 50Hz/60Hz
  • Power consumption: < 10W
  • External logic level control signal: 5V, 12V (standard), 24V (optional)
  • External analog control signal: 0-5V (standard); 0-10V, 4-20mA (optional)
  • External communication interface: MODBUS RS485
  • Ambient temperature: 0-40 °C
  • Relative humidity: < 80%
  • IP grade: IP31
  • Dimensions (L x W x H): 112mm x 96mm x 96mm (4.4 x 3.8 x 3.8 inch)
  • Weight: 0.8 kg (1.8 lbs)

BQ80S Suitable pump heads and tubing, flow parameters

Drive type Pump head Ch Tubing size (mm) Flow rate (mL/min) per channel
BQ80S
(Pump heads not
inter changeable)
FZ10 1 Wall:0.85~1, ID:1~3.17 0.05-40
DW10-1 1 Wall:0.8~1, ID:0.5~3.17 0.005-32
DW10-2 2 Wall:0.8~1, ID:0.5~2.54 0.005-19
DW10-3 3 Wall:0.8~1, ID:0.5~3.17 0.005-32
DW15-1 1 13# 14# 19# 16# 25# 0.005-64