Description
Pump Head Material
Shell: PPS
Card: PPS
Roller: SS304
Roller shaft: SS304
DT10 Flow Parameters
Tube material: Silicone,Pharmed,Viton,Chemical,Tygon 3603,etc.
Wall thickness:0.8~1mm, 13#14# wall thickness:1.6mm
| ID(mm) | 0 .13 | 0.25 | 1 | 2 | 2.4 | 3.2 | 0.8 | 1.6 |
| Tube | 13# | 14# | ||||||
| mL/rpm | 0.0023 | 0.0069 | 0.07 | 0.3 | 0.39 | 0.64 | 0.05 | 0.18 |
| mL/min ( (Continuous w orking max 600rpm) | 0.23 | 0.69 | 7.4 | 30 | 39 | 64 | 5 | 18 |
DT15 Flow Parameters
Tube material: Silicone,Pharmed,Viton,Chemical,Tygon 3603,etc.
Wall thickness:1.6mm
| ID(mm) | 2 .4 | 3.1 | 4.8 | 6.4 |
| Tube | 19# | 16# | 25# | 17# |
| mL/rpm | 0.67 | 1.0 | 2.2 | 3.7 |
| mL/min ( (Continuous w orking max 600rpm) | 400 | 600 | 1320 | 2240 |
Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, in actually it is effected by specific factors such as pressure, medium, etc. Above for reference only.
Pump Head Specification
DT10 series
Channel: 1,2,4,8
Roller: 8
Speed range: 0.1～100rpm/min
Flow range: 0.00023～64mL/min
Pressure Tube Clearance: Adjustable
Bear Liquid Temperature: Less than 200℃
Corrosion Resistance: PPS is resistant to most acid, alk ali,salt liquids and organic sol vents.
Motor: Stepper motor, servo motor ,AC gear motor, DC gear motor etc.
DT15 series
Channel: 1,2,4
Roller: 4
Speed range: 0.1～600rpm/min
Flow range: 0.067～2240mL/min
Pressure Tube Clearance: Adjustable
Bear Liquid Temperature: Less than 200℃
Corrosion Resistance: PPS is resistant to most acid, alk ali,salt liquids and organic sol vents.
Motor: Stepper motor, servo motor ,AC gear motor, DC gear motor etc.
Dimension(mm)
Tube Life Comparison Table
Notes:
The above data are all test results obtained by Lead Fluid laboratory under normal temperature and pressure for the transmission of pure water, which are for reference only; the actual service life may be affected by specific factors such as pressure, temperature, medium characteristics, tube batch and wall thickness; for specific problems, please contact Lead Fluid engineers to get better technical support.
Statement：The final explanation right of above information belongs to Lead Fluid.
