Description

Function and Feature
• Simple operation, small size, easy installation, suitable for ancillary equipment and laboratories.
• Built-in Pharmed BPT tubing whose working life is up to 12000 hours under continuously running
• Four-figure digital LED indicator displays working speed.
• The LED indicator displays the internal, external control mode.
• Mask keypad operation.
• Reversible direction, start/stop, adjust speed and full speed, state memory (power-down memory).
• Easy dispensing function, it realizes the repeat timing quantitative dispensing.
• Speed resolution is 0.1rpm.
• Plastic housing, adopts embedded design, also can work on the desktop separately.
• The circuit board with conformal coating makes it dust-proof and moisture-proof.
• Super anti-interference feature, wide input voltage range, acceptable for the complex power environment.
• External high-low electrical level controls the start/stop, reversible direction and easy dispensing function,
optically coupled isolator.
• Can input the electrical level 5V,12V or 24V.
• RS485 interface, MODBUS protocol is available, easy to connect other equipments.
•Optional footswitch or timer for dispensing fluid. 

Functions and Features

• Simple operation, portable size, easy to install. Suitable for equipment as an ancillary device and for laboratory use.
• 0.5% high precision rotating speed control with 0.1 rpm speed resolution. Speed range 0.1-80 rpm.
• The lifetime of the built-in Pharmed BPT tubing is up to 12000 hours for continuous running.
• Four-digit LED displays working speed and control mode.
• Membrane keypad.
• Reversible direction, start/stop, adjustable speed.
• Time dispense function. Repeat dispensing by setting the dispense duration time.
• Plastic housing, embedded design to work independently.
• The circuit board with conformal coating makes it dust-proof and moisture-proof.
• External logic level signal can control start/stop, direction and dispense function. External analog signal can adjust the rotating speed. Signal is optically isolated.
• MODBUS RS485 interface, easy to communicate with external control devices.
• Optional footswitch or timer for dispensing fluid.

Specifications

• Flow range: 0.005-64 mL/min
• Speed range: 0.1-80 rpm
• Speed accuracy: 0.5%
• Speed resolution: 0.1 rpm
• Power supply: AC 220V ± 10%, 50Hz/60Hz, AC 110V ± 10%, 50Hz/60Hz
• Power consumption: < 10W
• External logic level control signal: 5V, 12V (standard), 24V (optional)
• External analog control signal: 0-5V (standard); 0-10V, 4-20mA (optional)
• External communication interface: MODBUS RS485
• Ambient temperature: 0-40 °C
• Relative humidity: < 80%
• IP grade: IP31
• Dimensions (L x W x H): 112mm x 96mm x 96mm (4.4 x 3.8 x 3.8 inch)
• Weight: 0.8 kg (1.8 lbs)

BQ80S Suitable pump heads and tubing, flow parameters